🔌Power and LED States
Power States

There are two ways to power on your Looking Glass Go:
Connect one end of the cable to the USB-C port on the back of the display, and one end of the cable to a power outlet using the included power adapter. This will activate Standalone Mode (Solid White).
Alternatively, connect one end of the cable to the USB-C port on the back of the display, and one end of the cable to a computer. When connected to a computer, your Go will effectively have two modes to operate on: Standalone Mode (Solid White) or Desktop Mode (Solid Blue).
Press the power button once to turn your Looking Glass Go on.
Status LED Key
The Looking Glass Go has a status LED on the side of the device near the power button.
The status LED is helpful to determine what state the Looking Glass is in.
⚪️ Solid White
Powered on and in Standalone Mode.
⚪️ Breathing White
On standby, ready to be used in Standalone Mode.
⚪️ Blinking White
Switching to Standalone Mode.
🔵 Solid Blue
Looking Glass Go is running in Desktop Mode.
🔵 Blinking Blue
Switching to Desktop Mode.
🔵 Breathing Blue
On standby, ready to be used in Desktop Mode / DP Alt Mode available.
🔵 Breathing Blue (while connected to phone)
On standby, ready to be used with compatible phone.
🟣 Breathing Purple
Updating Firmware.
🟢 Solid Green
Connected to WiFi in Standalone Mode.
🟡 Flashing Yellow
Insufficient power to switch to Standalone Mode from Desktop Mode, no DP Alt Mode available. To troubleshoot, disconnect from power and reconnect cables.
🔴 Flashing Red
Insufficient power for Standalone Mode.
Last updated
Was this helpful?