🌉Looking Glass Bridge

Looking Glass Bridge is your software gateway into hologram land.

Looking Glass Bridge

Looking Glass Bridge facilitates communication between your computer and any connected Looking Glass devices. It is required for Looking Glass applications, webapps and development tools. Download the latest version from our software downloads page here.

Looking Glass Bridge is available for Windows, MacOS (m1/intel) and Linux based systems.

For Looking Glass Bridge to function properly your Looking Glass display must be setup properly in desktop mode. Follow the instructions on the following pages to make sure everything is pixel perfect.

💻Display settings on Windows💻Display settings on MacOS

Gen 1 Looking Glass devices are not intended to be used with Looking Glass Bridge, instead you should use our older driver HoloPlay Service.

Test your setup

This simple test can be run to ensure that hardware is connected, and software is installed and configured:

When the above button is pressed, your Looking Glass should show a hologram! If your device isn't showing a hologram, please make sure that you've got Looking Glass Bridge running, or that your device is properly plugged in and running in desktop mode.

Troubleshooting

For more trouble shooting tips or to download previous versions, see our troubleshooting page.

Looking Glass Bridge not detected

If the test above shows Looking Glass Bridge not detected, make sure it's installed and running. Click here for the latest version.

If it is installed but not running...

Windows

Click on the Windows Start menu and search for "Looking Glass Bridge":

If you can't find it, go to C:/Program Files (x86)/Looking Glass Factory/Bridge/ and double click Looking Glass Bridge.exe to launch it.

Once launched, try the Test Setup button to make sure it's running as intended.

Mac

You can open Looking Glass Bridge directly from your applications folder.

Once launched, click Test Setup button and you should see a hologram on your display!

Looking Glass Bridge does not work with safari, please use a different web browser to use Looking Glass Bridge with the web.

No Looking Glass detected / Error loading calibration

Looking Glass displays have two types of cables that should be connected to the computer, a USB cable and a HDMI/Displayport cable, depending on the model. Ensure that you've got both cables connected and that your Looking Glass is powered on.

For Looking Glass Portrait, ensure that your device is running in desktop mode.

1. Power down your Looking Glass and unplug all cables

2. Find the Looking Glass icon on the Windows taskbar or Mac menu bar.

3. Click on it to reveal the menu.

4. Click "Restart Bridge"

5. Plug cables back in

6. Rerun the test setup.

Linux

To install Looking Glass Bridge on Linux run the following commands after extracting the archive.

$ chmod +x lookingglassbridge.sh
$ ./lookingglassbridge.sh